Garage Floor Coatings in Laredo TX - a finish laid on a slab that's ready for it
Garage floor stained, dusty or flaking? We check the slab first, then grind and coat it so the finish has sound concrete to bond to.
What does it take to coat a garage floor in Laredo?
A garage floor coating in Laredo, TX is a hard epoxy or urethane layer bonded to concrete that's been ground and cleaned. It's often finished with colored vinyl chips spread through it for a speckled look like granite or terrazzo, and it turns a bare, dusty slab into a floor you can sweep clean.
Most people call us when their garage concrete has turned dusty, picked up oil stains or started peeling where an old paint job let go. The price mostly follows the size of the garage and how much the slab needs before it can take a coating, such as crack repair or stripping an old coating. The schedule follows the slab's moisture, the weather and the cure time before you can park, so the estimate is where you'll get your own figure. The City of Laredo's residential permit list names projects like carports, remodels and additions rather than floor coatings, so if you aren't sure whether your job needs a permit, we'll find out before work starts and pull it as your contractor if it does.
How we install garage floor coatings
Before we talk about colors or chips, I check whether your slab is dry enough to coat at all, because I'd rather tell you a slab isn't ready than coat it and watch it fail. I also ask whether the space is closed in or open to the sun, since that changes which product I'll recommend. Once the slab and the product are settled, our crew grinds the concrete with diamond tooling to open up the surface so the coating can soak in and grip, and we run a dust collector the whole time because grinding throws off a lot of fine dust. Then we fill cracks and pits, vacuum until no dust is left, roll on the base coat, broadcast the chips if you've chosen them and finish with a clear topcoat.
Some homeowners want to hear about more than one finish, and I'm glad to walk you through polyaspartic floor coatings at the estimate to see whether they suit your garage. If you'd rather have a smooth, marbled look than chips, metallic epoxy flooring goes on the same ground and cleaned slab.
Why Laredo homeowners call Truefinish Laredo Epoxy Floors for their garage floors
The owner writes your estimate
I come out myself to look at your floor and write the estimate, and my crew does the grinding, prep and installation while I check the work along the way. The person who judged your slab is the one making sure the job matches what you were told.
Coating garage floors since 2017
I started out grinding and coating garage floors for neighbors on weekends, and those side jobs became this business in 2017. Nine years on, I still read each product sheet closely before we open a can, because every product sets its own rules for temperature and cure.
Fully licensed and insured, on site
Truefinish Laredo Epoxy Floors is fully licensed and insured. You're welcome to ask for proof at the estimate, and I'll think well of you for asking.
Coating timed for Laredo heat
Laredo averages 182 days a year above 90°F, and one maker's garage kit lists a working range of 60 to 85°F for the air, the material and the slab, so timing your job here takes planning. Coating outside the hours when it heats up also lowers the risk of blisters, which the maker explains form when air trapped in the concrete's pinholes expands as it warms, so we'll set the start time with you.
On a garage floor, what matters most is a slab that's dry and sound and a product that suits how much sun the space gets. We work in Laredo and the cities around it, so when you're ready, call (956) 508-9073 or send us your details with your garage size, whether it's closed in or a carport, and any damp spots you've noticed.
Get a garage floor coating estimate at your home
Thank you for reaching out. We reply to calls and messages within one business day, and then I'll set a time to come out, look at your slab and write a free estimate on site. There's no obligation to go ahead.
Examples of coated garage floors
What homeowners ask about garage floor coatings
Can a damp garage slab in Laredo be coated?
Not until the moisture is dealt with, because epoxy and urethane coatings should only go on concrete that has no excess moisture and no high rate of moisture vapor coming up through it. If your slab isn't ready, I'll tell you so plainly, and we won't coat it until that changes.
How long does a new garage floor coating take before I can park on it?
For one maker's water-based epoxy kit at 70°F and 50% humidity, the floor takes light foot traffic in 12 to 16 hours and cars after 3 days. Plan to park somewhere else for those days, and allow longer in cooler weather, since the product and the temperature both change the wait.
Is a coated garage floor slippery when wet?
It can be, because coated concrete is usually smoother than bare concrete. If you often bring water in on your tires or from the yard, please tell me at the estimate so we can weigh that when you pick your finish.
Can my carport in Laredo be coated too?
A carport needs a product meant for sun, because one maker's water-based epoxy garage kit is for covered garages only and not for carports or areas in direct sunlight. Laredo averages 249 clear or partly cloudy days a year, so I'll ask how much sun your carport or open bay gets before we choose a product.
How much does a garage floor coating cost in Laredo?
There's no single price, because the size of your garage and the condition of the slab set most of it. Grinding off old paint or sealer, filling cracks and pits, and a full chip finish all add to the work, and I'll give you your own figure once I've seen the floor.
How do I get my garage ready for a floor coating?
Clear the floor of cars, shelves and stored items, and tell us about any gas water heater or other pilot light in the garage. One coating maker's instructions say pilot lights and electrical switches in an enclosed area must be off before and during application of solvent-based coatings, so I'll tell you whether your coating is one of those.
Other floor finishes we install
- Polyaspartic Floor Coatings
Polyaspartic is another coating option for a garage floor, and it's worth asking about at the estimate if you want to hear every product that might suit your slab.
- Metallic Epoxy Flooring
Choose metallic epoxy when you'd like a garage, basement or shop floor with a poured, swirled look instead of chips, laid over the same careful grinding and slab check.