Concrete Grinding & Surface Preparation in Laredo TX - a slab ready to hold a coating
Peeling coating, rough patches or a bare slab you want coated? We grind and prep the concrete so your new floor has something to grip.
How should my concrete be prepped before it's coated?
At Truefinish Laredo Epoxy Floors, concrete grinding and surface preparation in Laredo, TX is the work that takes a slab down to clean, sound concrete with the right texture, so a new floor coating grips the slab instead of peeling off it.
Most people call us because an old coating is lifting, the slab has rough or stained patches, or they've picked out a new garage floor coating and want it to last. We're based in Laredo and work across the city and the cities around it, on garage, basement, pool deck and shop floors. The price turns on the size of the floor, what's on it now and how much has to come off, and which method your coating calls for, so it's worth settling the coating before you compare quotes. The schedule turns mostly on whether an old coating has to be removed and whether the slab is ready to coat, and I'll give you your own figure when I see the floor for the estimate.
How our concrete grinding and surface preparation works
I like to settle the coating you want first and then match the grinding or blasting to it, because thicker coatings generally need a rougher surface than thin ones. Our crew grinds with diamond tooling on rotary or planetary machines, which takes off thin coatings and minor surface flaws and leaves a smoother texture that suits thin coatings, and more aggressive tooling leaves it somewhat rougher. For thick, high-build coatings, shot blasting, which throws small steel shot at the slab, opens the surface more, and neither method is better on every floor. Many jobs use both, since a grinder works the edges along the walls where a shot blaster can't reach. Once the texture is right, we clean the floor so the coating goes onto bare, sound concrete.
Prep often leads into other work. If you'd like to keep the look of the concrete rather than coat it, we can follow the grinding with concrete sealing, and if the slab is too worn or pitted to coat as it stands, concrete resurfacing and overlays give it a new top layer first.
Why Laredo homeowners and businesses call Truefinish Laredo Epoxy Floors for slab prep
I write your estimate myself
I come out to look at your floor and write the estimate, and my crew does the grinding and prep while I check the work along the way. The person who sized up your slab is the one keeping an eye on it, and you're treated with courtesy from the first visit to the last.
Nine years of careful prep
I started grinding and coating garage floors for neighbors on weekends, and in 2017 those side jobs became this business. I'd rather tell you a slab isn't ready than coat it and watch it fail, and I'll give you that answer straight.
Fully licensed and insured
We're fully licensed and insured. That matters when our crew brings heavy grinders into your garage, basement or business.
Street-edge work checked with the city
For work in the city right-of-way along the street, Laredo lists driveways and sidewalks among the work registered Street Cut Contractors may perform. If your prep reaches the driveway apron or sidewalk at the street, we'll find out what the city needs before work starts.
On this job, what's under the finish matters most, so prep is the part we won't rush. Call (956) 508-9073 or send us your project with the floor size in square feet, the coating on it now, the coating you want and the slab's age, and we'll take it from there.
Get a slab prep plan for the coating you want
We reply to calls and messages within one business day. After you send the form, we'll set a time for me to come look at your floor and write a free estimate on site, with no obligation. Thank you for taking the time to reach out.
Concrete grinding and prep work
Questions before you book concrete grinding
How much does concrete grinding cost in Laredo?
Concrete grinding across the US usually costs about $1.50 to $5 per square foot, and that covers equipment, labor and standard dust control. Where your floor falls depends on whether an old coating has to come off and how much texture your coating needs. I'll give you your own figure after I measure the floor at the estimate.
Does my old garage floor coating have to come off before I recoat it?
Not always, because a sound, compatible coating can sometimes be roughened and recoated, while one that's failing, incompatible or unknown should be removed. We test whether your old coating can stay, and a test patch shows whether the new coating will stick and whether the floor needs a lighter prep or a full removal.
How long does new concrete need to cure before it can be coated?
Most coatings call for concrete that has cured for about 28 days and been tested for moisture, though some systems are made for young, or green, concrete. If your slab is new, we plan the coating around that cure and follow the product data sheet for the system you choose.
What causes a garage floor coating to peel or bubble?
Poor prep and too much moisture in the slab are two of the usual causes, because excess moisture can make a coating come loose, peak up and break down, and it can feed microbial growth. That's why the moisture check belongs before the coating goes down. The reading is a percentage and the coating's maker sets the highest result it accepts, so ask which limit and tests your planned coating needs.
Who pulls the permit for floor work in Laredo?
In Laredo, the contractor you hire typically pulls the permit, and if you pull it yourself, the city treats you as the contractor for the project. When a job needs a city permit, we pull it as your contractor and handle the paperwork, and if it isn't clear whether yours needs one, we'll find out before work starts. The city says work without a permit isn't allowed, and its Building Development Services guides permits at 956-794-1625.
Is concrete grinding dusty inside a garage or house?
It can be, because grinding releases crystalline silica fine enough to breathe in, so grinders should run with dust shrouds and HEPA vacuum extraction. That's how our crew runs them, with the shroud and vacuum pulling dust in at the floor as the machine works.
Work that often goes with concrete prep
- Concrete Sealing
If you'd rather keep the look of bare concrete, a sealer on a freshly prepped slab helps it resist stains and water and cuts down on surface dusting.
- Concrete Resurfacing & Overlays
Deep pitting, scaling or old patchwork can be more than grinding should take off, and an overlay rebuilds the surface so your coating has a sound base.