Concrete Resurfacing & Overlays in Laredo TX - a new surface on a sound slab
Worn, faded concrete that's still solid underneath can take a thin new layer, giving you a fresh surface without tearing out the slab.
What does concrete resurfacing do for a worn slab?
Concrete resurfacing and overlays in Laredo, TX put a thin new layer over old concrete that's still sound, so your driveway, patio or floor gets a renewed surface without tearing out and repouring the slab.
Most people who call us are looking at concrete that's worn, faded or stained but otherwise solid, and they'd like it to look new again without starting over. The price mostly turns on the size of the area, how much repair and grinding the slab needs first and whether you want a plain refresh or a decorative finish, while the schedule turns on the slab's condition and, in summer, working around the heat. I'll give you your own figure once I've come out and seen the slab.
How we handle concrete resurfacing and overlays
The first question on any resurfacing job is whether your slab is sound enough to take a new layer, so I start by looking it over with you, and if it needs replacing instead, I'll tell you so honestly. If it's a good fit, we help you choose between a simple refresh, which renews a plain surface that has worn or faded, and a decorative overlay, which adds color, texture, saw-cut lines or a stamped pattern to the same slab. Once you've decided, our crew grinds and cleans the concrete so no old sealer, oil, dirt or paint is left for the new layer to sit on, repairs what needs it and then puts down the overlay and finishes it to the look you picked. I check the work along the way, and we clean up before we leave.
Some floors need a different answer. An indoor floor that's uneven is usually better served by self-leveling concrete and overlays, which flatten the surface before a finish goes on, and worn concrete around a pool belongs with our pool deck coatings and resurfacing work, where the finish has to handle water and sun.
Why Laredo homeowners call Truefinish Laredo Epoxy Floors for resurfacing
I look at your slab myself
I come out myself to see the floor and write the estimate, and then my crew does the grinding, prep and installation while I check the work along the way. The person who judged your slab is the one making sure the job matches what you were told.
Webb County clay checked first
About a third of Webb County's soil is high shrink-swell clay, roughly the Texas average, so slabs here can lift or sink as the ground swells and dries out. We look for signs of that movement before we suggest an overlay, because a new layer is only worth putting on a slab that has stayed put.
Careful prep since 2017
We've been in business since 2017, and I still read the product sheets closely before we open a can. Prep is the part you can't see once the new layer is down, so it's where we're most careful.
Licensed and insured for your project
Truefinish Laredo Epoxy Floors is fully licensed and insured. You shouldn't have to wonder who is responsible for the work going on at your own house, and our crew treats your home with courtesy from the first visit to the last.
On a resurfacing job, the slab under the new layer matters more than anything we put on top, so the best next step is letting me see yours. Call (956) 508-9073 or send us a few photos through our contact page.
Get a free on-site estimate for your concrete resurfacing
Send us the rough size of the slab, a few photos and whether you'd like a plain refresh or a decorative finish. We reply within one business day, and then I come out myself to look at the slab and write your free estimate, with no obligation to go ahead. Thank you for taking the time to reach out.
Resurfaced and overlaid concrete
Questions before you resurface your concrete
How do I know if my old driveway in Laredo can be resurfaced instead of replaced?
If the slab is still sound, it can usually take a new layer, because an overlay bonds to the old concrete and moves with it. A driveway that has heaved, settled or broken apart needs to come out and be repoured, since a new surface would just follow the same movement. A few photos of the cracks and low spots help me see what you're dealing with before I come out.
How much does concrete resurfacing cost in Laredo, TX?
The cost comes down to your slab, so I give you a figure after I've seen it rather than guessing at one here. A plain resurfacer over a worn surface generally costs less than a decorative overlay with color, saw-cut lines or a stamped pattern, and cracks or low spots that need repair first add to the work. The estimate is free and done at your property.
How often does a stamped concrete overlay need resealing?
One national guide calls for resealing stamped concrete every two to five years. If you choose a stamped overlay, plan and budget for that repeat sealing the way you would any other upkeep on the house, and we'll go over it with you before you settle on a finish.
Who pulls the permit for concrete resurfacing in Laredo?
In Laredo, the contractor you hire typically pulls the residential permit, and the city says work without a permit isn't allowed. When your job needs a city permit, we pull it as your contractor and handle the paperwork, and if you aren't sure whether yours needs one, we'll find out before work starts. You can pull it yourself, but the city then treats you as the contractor, so it's worth asking any crew you're considering who will pull it. If any of the work is on a driveway or sidewalk in the city's right-of-way, the strip along the street the city controls, the city lists that as work for its registered street cut and utility contractors, and we'll check that part with the city before work starts.
How do I plan concrete resurfacing for the summer in Laredo?
Plan on an early-morning start, because national concrete guidance puts most hot-weather trouble with fresh concrete in summer, and one concrete association advises early-morning placement whenever possible. Wind and sun matter as much as the thermometer, so a windy, sunny day calls for stricter precautions than a calm, humid one at the same temperature. That association also recommends temporary windbreaks and sunshades to cut wind and surface heat, which is a fair thing to ask any crew about.
Do control joints stay open when concrete is resurfaced?
They should, because one overlay maker's instructions say control joints must be honored, so the joints stay open through the new layer. Control joints are the straight cuts that give a slab a planned place to crack, and covering them over usually just moves that crack into your new finish.
Related concrete work you may need
- Self-Leveling Concrete & Overlays
If an indoor floor dips or slopes, a self-leveling pour fills the low spots so tile, vinyl or a coating has a flat, level base to go down on.
- Pool Deck Coatings & Resurfacing
Pool decks take sun, water and bare feet every day, so a worn or slick deck usually calls for a coating made for wet areas that stays comfortable underfoot.